Home Contents

Products page   Services Page

 

 

 Stainless Steel

The picture above, shows just a small selection of over 250, specially made Stainless Steel parts we sell for all models from D1 to A75. We believe this is the largest range of parts available anywhere, for BSA's. Most of them only available from us, or our selected outlets. All are guaranteed to fit, and are able to retro fit to the original parts, where necessary. We rely on the quality of our goods to sell them. However, we are aware that cost is also an issue, and our prices reflect this. Compare our quality with others, then look at the price. We know we win on both counts, therefore so do our customers.

 

CATALOGUE 77 AUG 2010

Back in stock and new items

We are constantly adding to our range of over 1200 parts for BSAs. Also since we took over and found stocks were low or non-existant we have worked to get these parts back in stock.

 

 

29-5839 left hand thread nut

65-5328 steering damper rod bottom nut

Girling rear suspension lower shrouds, highly polished

67-5566 front wheel spindle 1954/55 A+B models, also A65/B25 from1966

NEW 14-0232 and 21-2105 OIF B25 B50 sidestand bolt made 1/8" longer

68-6110 wheel spacer A50 A65

41-0034 C15 B40 engine bolt with small hex raised head

42-4793 side stand bolt A7/A10 A65 pre oil in frame

67-4129 D washer A7/10 B31/33 Gold Star etc bottom suspension

57-1169 kickstart swivel bolt

42-6078 rear wheel spindle washer

40-4909 spacer for mudguard bridge

41-5141 fork drain and locating screw

 97-2634 fork drain and locating screw

7/16" shakeproof washers, previously unobtainable

60-8038 and 8039 A65 tank beading strip

Back in stock, 67-6060 rigid, plunger rear wheel half spindle.

At last, 68-8038 and 68-8039 A65 petrol tank centre beading.

65-5333 HANDLEBAR CLAMPS HIGHLY POLISHED

Lucas Magdyno nut, holds dynamo to triangular backing plate

Magdyno nut

New 40-5018 97-2651 Steering stem nut C15, B40, Bantam etc.

New. Oil pressure release valve to fit A series from 1946 to 1973

Brake arm, straight with square hole parallel with axis or offset, 42-5886 40-5530 and 37-1331 please state preference for square hole.

Gearbox adjuster set for swingarm A7 A10 B31 Gold Star Etc. £42.00

02-0370 spacer, handlebar clip

68-6906 spacer A65

NEW 67-3180 Clutch actuating arm, swingarm and plunger gearbox

21-0785 bottom yoke pinch bolts

68-8317 spacer A65 oil tank

42-5014 steering damper anchor plate

 42-8339 spacer

15-0531 brake nut

NEW.75-5529 Brake return spring for 1968 twin leading shoe brake.

NEW. 68-6134 Brake spring, A65 etc. Half width hub.

42-6320 Rear wheel spindle A/B series 1958 on.

67-4166 Plunger rear suspension top plugs

41-5146 Fork top nut, also 97-2652

42-4340 Hollow swingarm spindle for B31/33/32/34 A7/10 A50/65 up to 1968 at same price as before.

At last we have back in stock 67-1876 A7/A10 Dynamo strap with trunnion. Just like the original but in stainless steel. £16.95

Also back in 29-7564 Footrest pivot bolt, 65-8034 Tank Bolt with hole.

 

We have added some new items including metric bolts and STAINLESS jubilee clips.

New, and only from us

Our Stainless Steel Grease nipples.

1/4 BSF £2 each

Back in stock 65-0311 Rocker feed nuts (Acorn) A10, B31

Back in stock 68-5108 headlamp spacer, 97-2631 headlamp spacer

New items 68-5104 headlamp washer, 97-2630 headlamp washer

Throw away those big washers you were forced to fit, as this part was unavailable, and fit these, as  they have now been made again, only available from us.

65-5331 highly polished fork top nut for most models up to 1965 only £16.50 a pair with stainless washers.

Magdyno end cap highly polished. Note new lower price £9.95

68-5150 Damper plate A50/65 1966/67, highly polished

02-1309 Fork drain plug, all models except shuttle valve

02-0220 Kickstart crank spring bolt, A B series, Gold Star

Brake rod clevis, tapped and untapped, plus brake rods

FULL ASSY FOR MOUNTING SWINGING ARM FRAMED OIL TANK INC “T” BOLT, NUT ETC £14.85

42-6320 REAR WHEEL SPINDLE A/B SERIES 58 ON

29-2203 A7/10 dynamo strap eye bolt

 

STAINLESS STEEL FASTENERS AND COMPONENTS

All our stainless steel parts are made in the UK from 18/8 grade or 303 grade for spindles etc. All spindles, as per BSA practice, are ground on the bearing surfaces for a proper fit, not turned.

Many part numbers which are standard nuts and bolts, are not listed here, but we carry as standard stock. Please enquire. We have all the sizes of bolt or nut relating to a part number, to hand.

 Please note:  All prices include VAT but not postage and packaging.  All parcels are weighed and priced for posting accordingly, so you pay only the correct amount.

Telephone 0161 969 3850
 

We are open 9:30 am until 5pm Monday till Saturday. Closed Sunday

We accept all major debit and credit cards

ABBREVIATIONS USED IN THIS CATALOGUE

 

AE          =              Aerotight                                    CSK       =              Countersunk         OD         =              Outside Diameter

AF          =              Across Flats                                Dia        =              Diameter              ST         =              Staytite

BA          =              British Association                        HEX       =              Hexagonal            UNC       =              Unified National Coarse

BSF        =              British Standard Fine                     M          =              Metric                  UNF       =              Unified National Fine

BSW       =              British Standard Whitworth             NY         =              Nyloc                  TPI        =              Threads Per Inch

 

 

 Below is a table to help you, of threads per inch of popular sizes  .

3/16”

BSF

32

 

 

 

 

 

 

 

 

 

 

 

 

1/4”

BSF

26

 

1/4”

BSW

20

 

1/4”

UNC

20

 

1/4”

UNF

28

5/16”

BSF

22

 

5/16”

BSW

18

 

5/16”

UNC

18

 

5/16”

UNF

24

3/8”

BSF

20

 

3/8”

BSW

16

 

3/8”

UNC

16

 

3/8”

UNF

24

7/16”

BSF

18

 

7/16”

BSW

14

 

7/16”

UNC

14

 

7/16”

UNF

20

1/2”

BSF

16

 

1/2”

BSW

12

 

1/2”

UNC

13

 

1/2”

UNF

20

9/16”

BSF

16

 

9/16”

BSW

12

 

9/16”

UNC

12

 

9/16”

UNF

18

5/8”

BSF

14

 

5/8”

BSW

11

 

5/8”

UNC

11

 

5/8”

UNF

18

 

1/4” UNF fits spanner size 7/16” AF               1/2” UNF fits spanner size 3/4” AF  7/16” UNF fits spanner size 5/8” AF

3/8” UNF fits spanner size 9/16” AF               5/16” UNF fits spanner size 1/2” AF

WASHERS

FLAT WASHERS

Standard Thickness

 

 

Price

Size

Each

Per 10

Per 100

4BA

.03

0.20

1.80

1/8

.03

0.20

1.80

2 BA (3/16)

.03

0.20

1.80

1/4

.04

0.30

2.80

5/16

.05

0.40

3.80

3/8

.06

0.50

4.80

7/16

0.10

0.90

8.00

1/2

0.13

1.20

11.00

9/16

0.23

2.20

20.50

5/8

0.23

2.20

20.50

3/4

0.42

3.90

 

7/8

0.55

5.00

 

 

SPRING WASHERS

Standard Type

 

 

 

Price

Size

Each

Per 10

Per 100

4BA

.02

0.15

1.30

1/8

.02

0.15

1.30

2 BA (3/16)

.03

0.20

1.80

1/4

.04

0.30

2.80

5/16

.05

0.45

4.20

3/8

.07

0.60

5.00

7/16

0.13

0.95

-

1/2

0.15

1.00

9.00

5/8

0.26

2.25

20.00

 

PENNY WASHERS

All 1 inch Outside Diameter.

Price

Size

Each

3/16 Hole

0.19

1/4 Hole

0.19

5/16 Hole

0.19

3/8 Hole

0.19

 

HEAVY DUTY SPRING WASHERS

Rectangular Section

Size

Each

Per 10

2 BA (3/16)

0.03

0.25

1/4 M6

0.05

0.40

5/16 M8

0.07

0.60

3/8 M10

0.09

0.80

1/2 M12

0.17

1.50

7/16

0.18

1.60
     

 

SHAKEPROOF WASHERS

Internal Teeth

 

Size

Each

Per 10

3/16 M5

0.03

0.25

1/4 M6

0.04

0.35

5/16 M8

0.06

0.50

3/8 M10

0.08

0.70

7/16

0.32

3.20

1/2

0.15

1.40

5/8 M16

0.23

2.00

3/4 M20

0.36

3.25

63/64 M24

0.65

6.00

 

HOSE CLIPS

All Stainless Construction. For oil and petrol pipes, carb inlets, tubes, hoses, gaiters shrouds, radiator and heater hoses, air ducts, etc. All have 5/16” wide bands, superb polished finish.

 

Nearest Trade

Diameter

 

Price

Order Ref

Reference

Mm

Inches

Each

FX8-16

MOO

9-19

13/32 - 5/8

0.70

FX8-28

1A

18-28

3/4 - 1 1/16

0.80

WDA34

1X

25-45

1 - 1 3/4

1.00

WDA48

2X

33-57

1 5/8 - 2 3/8

1.15

FX8-70

3

47-67

1 7/8 - 2 5/8

1.10

FX8-80

3X

62-82

2 7/16 - 3 3/16

1.20

FX8-100

4X

77-97

3 1/16 - 3 13/16

1.30

Stainless steel ties ideal for fork gaitors or air filter connectors.

 Very flexible.7.9mm wide x 300mm 95p each

CLEVIS PINS

ALL ARE UNDRILLED FOR SPLIT PIN

Price

Size

Each

1/4 X 3/4

1.15

1/4 X 1"

1.30

5/16 X 1 1/4"

1.50
   

 

SPLIT PINS

Size

Length

Each

Per 10

1/32

x 1/2

0.03

0.25

1/32

x 1

0.04

0.35

3/64

x 1

0.04

0.35

1/16

x 1/2

0.03

0.25

1/16

x 1

0.04

0.35

3/32

x 1/2

0.05

0.4 5

3/32

x 5/8

0.05

0.45

3/32

x 1

0.06

0.55

1/8

x 1

0.07

0.65

1/8

x 2

0.20

1.70

1/8

x 2 1/2

0.20

1.90

3/16

x 2 1/2

0.18

1.70

 

NUTS

HEX FULL NUTS

 

Price

Size

Each

6BA

0.14

4BA

0.15

 

 

2BA

0.28

1BA

0.49

0BA

0.50

 

 

1/4 BSF

0.58

5/16 BSF

0.40

3/8 BSF

0.55

7/16 BSF

1.49

7/16 BSF thin nut

1.62

1/2 BSF

1.72

9/16 BSF

2.50

5/8 BSF

2.95

1/4 BSF reduced hex

 0.58

3/16 BSW

0.15

1/4 BSW

0.24

5/16 BSW

0.30

3/8 BSW

0.45

 

 

1/4 UNC

0.33

5/16 UNC

0.40

3/8 UNC

0.50

 

 

3/16 UNF ( No 10)

0.20

1/4 UNF

0.20

5/16 UNF

0.25

3/8 UNF

0.30

7/16 UNF

0.96

7/16 UNF THIN NUT

0.70

1/2 UNF

1.22

9/16 UNF

1.75

5/8 UNF

2.10

METRIC (COARSE)

M3

0.04

M4

0.04

M5

0.05

M6

0.08

M8

0.10

M10

0.16

M12

0.25

METRIC FINE

1.25 PITCH

M10

0.25

M12

0.35

 

SELF LOCKING NUTS

 

 

Price

Size

Type

Each

4BA

AE

0.47

2BA

NY

0.53

 

 

 

 

 

 

1/4 BSF

AE

1.49

1/4 BSF

NY

0.88

5/16 BSF

NY

1.10

3/8 BSF

NY

1.25

7/16 BSF

NY

2.35

1/2 BSF

NY

3.00
     

1/4UNF

ST

1.07

1/4 UNF

NY

0.65

5/16 UNF

NY

0.83

5/16 UNF

ST

OOS

3/8 UNF

ST

OOS

3/8 UNF

NY

0.95

7/16 UNF

NY

1.65

7/16 UNF

ST

2.70

1/2 UNF

NY

2.50

1/2 UNF

ST

2.97

9/16 UNF

ST

4.59

5/8 UNF

ST

4.65

1/4 UNC

NY

0.65

5/16 UNC

NY

0.83

 

 

 

M4

NY

0.20

M5

NY

0.25

M6

NY

0.35

M8

NY

0.38

M10

NY

0.60

M12

NY

OOS

M10 FINE

NY

0.70

M12 FINE

NY

1.00

 

Staytite (ST) nuts have raised area like nylocs

 but have an all steel locking device. They look

 better than Nyloc and stay cleaner.

WING NUTS

Price

 

Each

M5

0.48

M6

OOS

M8

OOS

M10

OOS

 

DOME NUTS

 

Price

Size

Each

2BA

1.00

1/4 BSW

 1.35

5/16 BSW

 1.82

1/4 BSF

1.34

5/16 BSF

1.63

3/8 BSF

1.75

7/16 BSF

2.68

1/2  BSF

3.00

1/4 UNF

1.28

5/16 UNF

1.65

3/8 UNF

2.52

7/16 UNF

2.75

7/16 UNF HIGH

3.20

1/2 UNF

2.99

 

 

M4

0.39

M5

0.48

M6

0.67

M8

0.80

M10

1.00

M10 FINE

1.10

M12 FINE

 1.15

 

Thin nuts
  3/16 UNF 0.15
  7/16 UNC 0.60
  7/16 BSF 1.20
       
       
       
       
       
       
       

HEXAGON HEAD BOLTS AND SET SCREWS

Bolts (B)                   Set Screws (S)

A SET SCREW is threaded all the way, a BOLT is only threaded part way.

 

UNF

 

 

 

Price

 

Dia

Length

Each

S

3/16”

1/2”

0.32

S

1/4”

1/2”

0.68

S

1/4”

5/8”

0.72

S

1/4”

3/4”

0.76

S

1/4”

1”

0.92

B

1/4”

1 1/4”

0.99

S

1/4”

1 1/2”

1.19

B

1/4”

1 1/2”

1.22

B

1/4"

1 3/4”

1.37

B

1/4”

2”

1.52

B

1/4”

2 1/2”

1.73

B

1/4”

3”

2.25

B

1/4”

3 1/2”

2.78

 

 

 

 

S

5/16”

1/2”

0.89

S

5/16”

3/4”

1.13

S

5/16”

7/8”

1.22

S

5/16”

1”

1.36

B

5/16”

1 1/4”

1.40

B

5/16”

1 1/2”

1.74

B

5/16”

1 3/4”

1.82

B

5/16”

2”

2.04

B

5/16”

2 1/4”

2.08

B

5/16”

2 1/2”

2.34

B

5/16”

2 3/4”

2.48

B

5/16”

3”

2.57

B

5/16”

3 1/4”

3.03

B

5/16”

3 1/2”

3.08

B

5/16”

4”

3.93

B

5/16”

4 1/4”

6.54

B

5/16”

4 1/2”

6.56

B

5/16”

5”

6.62

 

 

 

 

S

3/8”

3/4"

1.40

S

3/8”

1”

1.59

B

3/8”

1 1/4”

1.68

B

3/8”

1 1/2”

1.94

B

3/8”

1 3/4”

2.18

B

3/8”

2”

2.63

B

3/8”

2 1/2”

3.15

B

3/8”

3”

3.60

B

3/8”

3 1/2”

3.93

B

3/8”

4”

4.46

B

3/8”

4 1/2”

6.01

 

 

 

 

S

7/16”

1”

2.60

S

7/16”

1 1/4”

3.04

S

7/16”

1 1/2”

3.13

B

7/16”

2”

4.57

B

7/16”

2 1/2”

5.29

B

7/16”

2 3/4”

5.50

B

7/16”

3”

5.57

B

7/16”

3 1/2”

7.56

B

7/16”

4”

7.96

B

7/16”

5”

 

 

 

UNF

 

 

 

Price

 

Dia

Length

Each

S

1/2”

1”

 3.50

S

1/2”

1 1/4”

3.83

S

1/2”

1 1/2”

4.20

S

1/2”

1 3/4”

5.25

B

1/2”

2”

5.78

B

1/2”

2 1/2”

6.41

B

1/2”

3”

7.35

B

1/2”

3 1/2”

7.88

B

1/2”

4”

8.55

B

1/2”

4 1/2”

9.03

 

 

BSW

 

 

 

Price

 

Dia

Length

Each

S

3/16”

1/2”

0.44

S

3/16”

1"

0.69

S

3/16”

2”

0.92

S

1/4”

5/8”

0.52

S

1/4”

3/4”

0.60

S

1/4”

1”

0.74

S

1/4”

1 1/4”

0.67

B

1/4”

1 1/2”

0.74

B

1/4”

2”

0.92

B

1/4”

2 1/2”

1.05

S

1/4”

3”

1.55

S

5/16”

1/2”

0.49

S

5/16”

3/4”

0.75

S

5/16”

1”

0.98

S

5/16”

1 1/4”

1.01

B

5/16”

1 1/2”

1.10

S

5/16”

2”

1.37

B

5/16”

2 1/2”

1.60

B

5/16”

3”

1.83

S